HP Mini 5101 - Manual (Page 97)

9. Lift the top edge of the keyboard up and remove the keyboard from the computer to expose the
hard drive.
10. Remove the two hard drive screws (1).
11. Loosen the captive hard drive screw (2).
12. Pull the hard drive tab (3) to the right to disconnect the hard drive, and then lift the hard drive out
of the hard drive bay (4).
To install a hard drive:
1. Insert the hard drive into the hard drive bay (1).
2. Pull the hard drive tab (2) to the left to connect the hard drive.
3. Tighten the captive hard drive screw (3).
Replacing a hard drive 87