HP Mini 5101 - Manual (Page 106)

System Configuration menu
NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language Change the Computer Setup language.
Boot options ● Set an f9 , f10 , and f12 delay when starting up.
● Enable/disable CD-ROM boot.
● Enable/disable floppy boot.
● Enable/disable internal network adapter boot.
● Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
● Set the Express Boot Popup delay in seconds.
● Set the boot order.
◦ 1st boot device: USB CD-ROM
◦ 2nd boot device: USB floppy
◦ 3rd boot device: USB SuperDisk
◦ 4th boot device: Notebook hard drive
◦ 5th boot device: USB hard disk
◦ 6th boot device: Network controller
Device configurations ● Swap the functions of the fn key and left ctrl key.
● Enable/disable USB legacy support. When enabled, USB
legacy support allows the following:
◦ Use of a USB keyboard in Computer Setup even
when a your operating system is not running.
◦ Startup from bootable USB devices, including a hard
drive, diskette drive, or optical drive connected by a
USB port to the computer.
● Enable/disable BIOS DMA data transfers.
● Enable/disable fan always on while connected to an AC
outlet.
● Enable/disable data execution prevention.
● Enable/disable LAN power saving mode.
● Enable/disable SATA Native Mode.
● Enable/disable Dual Core CPU.
● Enable/disable HDD translation mode.
Built-in device options ● Enable/disable embedded WLAN Device Radio.
● Enable/disable embedded Bluetooth Device Radio.
● Enable/disable Network Interface Controller (NIC)
96 Chapter 11 Computer Setup