View disk status, Stm disk information: hp-ux – HP StorageWorks 2110 Disk System User Manual
Page 26
HP StorageWorks Disk System 2100 / 2110
26
View Disk Status
HP-UX and MPE/iX utilities provide descriptive and diagnostic information about
disks, including disk type, firmware revision, and errors. On HP-UX and MPE/iX 6.5
or later, the disk utility is Support Tools Manager (STM). For all other operating
systems, consult the appropriate system administration manual for disk module status
checking procedures.
STM Disk Information: HP-UX
STM displays the last-generated Information Log for a selected disk. Start STM and
run the Information tool as follows.
1
Log on the system.
2
At the system prompt, type xstm&. STM starts and displays a graphic of the
devices on the system.
3
Select the desired disk.
4
Select Information from the Tools menu.
5
To generate a current log, select Run. The log will be displayed as soon as it is
generated
6
To view a log without updating the contents, select Information Log.
7
Select Done when you have finished viewing the information.
8
To quit STM, type exit.
Figure 15 shows a sample Information Log.