HP StorageWorks 2110 Disk System - Manual (Page 21)

21 HP StorageWorks Disk System 2100 / 2110
Eng
lish
Remove the Disk System
Reverse the installation instructions enclosed with the rackmount kit for your cabinet:
■
A5679A - Hewlett-Packard Rack Systems/E for Enterprise Systems
■
A5680A - all other Hewlett-Packard rack systems for Enterprise Systems
purchased before November 1998.
■
A6532A - Hewlett-Packard Rack Systems/E for Commercial Systems
■
A6533A - all other Hewlett-Packard rack systems for Commercial Systems
purchased before November 1998.
If your disk system is a factory-integrated unit, see the figure below for removal
instructions.
FIGURE 12 Removing the Disk System
If you are exchanging a desktop disk system, be sure to remove and store the plastic
Desktop Disk System Cover for use on the replacement disk system.
Some data paths may be slot-dependent. Be sure to note the slot from which
the disk module is removed so it can be installed in the same slot in the
replacement disk system.
CAUTION