HP StorageWorks 2.64 Director Switch - Manual (Page 140)

Operating and Managing Products and Parts
140 Embedded Web Server User Guide
Clearing the System Error Light
The amber system error light indicator, shown on the Switch or Director tab view
of the View page, simulates the system error light on the actual switch. When this
indicator illuminates, an event has occurred requiring immediate attention, such as
the failure of the system, power supply/fan, or port. For more information, see
Table 5 .
To clear the system error light, select Operations from the navigation panel.
Select the Switch or Director tab as appropriate. Select the Sys Err Light tab to
display the System Error Light tab view, which describes the current system
error light state (
Figure 44 ).
If the state of the system error light is On, click the Clear Light button to clear
the error light.
If your change is successful, a message displays stating that your change has been
successfully activated. You can refresh the web browser to verify that the change
has been made.
Figure 44: System Error Light