HP Deskjet 932c Printer - Manual (Page 26)

20
Beyond the Basics 2
OUT Tray Flap down
Paper width guide
IN tray pulled out
OUT Tray Flap up
Single envelope and
small media slot
Paper length guide
IN tray pushed in Paper width guide
I want to print… I should…
Banners
1 Tear off the number of sheets (up to 20) you need.
2 Tear off and discard the perforated strips, if any.
3 Slide out the paper guides, and remove all paper from
the IN tray.
4 Raise the OUT Tray Flap and leave it in the up position
to print your banners.
5 Put the banner paper in the IN tray so that the
unattached edge of the banner paper stack is toward
the printer.
6 Slide the paper guides snugly against the sheets.
7 Check Banner Printing in the Setup tab and choose
the appropriate paper type and size.
8 Print the banner.