HP Deskjet 932c Printer - Manual (Page 24)

18
Beyond the Basics 2
OUT Tray Flap down
Paper width guide
IN tray pulled out
OUT Tray Flap up
Single envelope and
small media slot
Paper length guide
IN tray pushed in Paper width guide
I want to print… I should…
Transparencies
1 Slide out both of the paper guides, and remove all
paper from the IN tray.
2 Fan the edges of the transparency sheets to
separate them, then align the edges.
3 Insert a stack of up to 25 transparency sheets, rough
side down and the adhesive strip towards the printer.
4 Slide the paper guides snugly against the
transparencies.
5 Choose the print settings that match the type and size
of the transparencies.
6 Print the transparencies.
7 The printer waits for transparencies to dry before
releasing them automatically. Press the
Resume
Button to continue printing.
Legal (8.5 x 14 in.) Paper 1 Raise the OUT Tray Flap and pull out the IN tray.
2 Slide out both of the paper guides.
3 Insert a stack of legal-sized paper into the IN tray,
printable side down.
Make sure you slide the paper as far as it will go into
the IN tray, leaving the remainder of the paper resting
over the edge of the IN tray.
4 Slide the paper width guide snugly against the stack.
5 Lower the OUT Tray Flap.
6 Choose the appropriate print settings.
7 Print your document.