HP EliteBook 8470w Mobile Workstation - Manual (Page 62)

8. Connect AC power and external devices to the computer.
9. Turn on the computer.
To install the hard drive in the ProBook:
1. Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the
hard drive bay (2).
2. Pull the plastic tab (3) toward the center of the computer to engage the hard drive with the
connector.
3. Tighten the hard drive screws (4).
4. Replace the service door (see Replacing the service door on page 48 ).
5. Insert the battery (see Inserting or removing the battery on page 40 ).
6. Connect AC power and external devices to the computer.
7. Turn on the computer.
52 Chapter 7 Drives