HP StorageWorks 2.32 Edge Switch - Manual (Page 98)

Configuring SAN Products and Fabrics
98 HA-Fabric Manager User Guide
Note: This process does not change the configuration of the product. It only changes
the information that is stored on the local appliance.
1. Right-click a product icon and choose Properties. The Properties dialog box
displays, as shown in Figure 43 .
Figure 43: Properties dialog box
Note: If the product you selected is offline, you are not be able to edit this
information.
2. Edit information as necessary.
3. Click OK.
Determining a Product’s Operational Status
You can determine a product’s operational status by looking at the Physical Map
or the Product List. On both the Physical Map and the Product List, you can
determine a product’s operational status by looking at the associated icons, as
shown in
Table 5 .