HP StorageWorks 2.32 Edge Switch - Manual (Page 207)

Configuring Zoning
207 HA-Fabric Manager User Guide
Finding Members in a Zone
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Choose a device or port from the Potential Zone Members list and click
Find to the right of the Potential Zone Members list.
5. All found members are highlighted in the Zones list.
Finding Zones in a Zone Set
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Choose a zone member or zone from the Zones list and click Find to the right
of the Zones list.
5. All zones found are highlighted in the Zone Sets list.
Listing Zone Members
1. Choose View All > Levels > All Levels. All levels display on the Product
List.
1. Expand a product on the Product List to see the ports.
2. Right-click a port and choose List Zone Members. The List Zone Members
dialog box displays, as shown in Figure 109 . The fabric’s nickname, the
port’s name, and all zone members display.