Saving the active zone set into a zoning library, 109 list zone members dialog box, Figure 109 – HP StorageWorks 2.32 Edge Switch User Manual
Page 208
Configuring Zoning
208
Figure 109: List Zone Members dialog box
3. Click Close to close the dialog box.
Saving the Active Zone Set into a Zoning Library
When you manage a switch’s zone set via one appliance and then import that
switch into a new appliance, any pre-existing zoning information on the switch is
not stored on the new appliance until you save the current zone set. Perform the
following:
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Active Zone Set tab.
4. Choose the active zoneset.
5. Click Save As. The Save Active Zone Set As dialog box displays.
6. Rename the active zone set and click OK. This imports the switch’s zoning
information to the current appliance. You can now manage zones and zone
sets through the new appliance.