HP StorageWorks 2.32 Edge Switch - Manual (Page 181)

Optional Features
181 HA-Fabric Manager User Guide
■ Types of Rules—There are three types of rules that you can write to evaluate
a plan:
Table 10: Planning Rule Parameters
Parameter Required Description Formatting
set rule_id Yes Sets the rule ID. The
rule is no loaded if this
is not specified.
Must be a unique value,
but can be any length and
any format.
where rule Yes Sets the actual rule. The
rule is not loaded if this
is not specified. See
“ Types of Rules—There
are three types of rules
that you can write to
evaluate a plan:” on
page 181 and
“ Keywords—When
writing the where rule
parameter, only certain
keywords may be
used.” on page 183 for
more information.
Use only the keywords
provided; otherwise the
rule fails.
description No Provides a more
detailed description of
the rule.
Must be prepended with
an “And.”
Must be enclosed within
quotation marks.
headline No Provides a short
overview of the rule.
Must be prepended with
an “And.”
Must be enclosed within
quotation marks.
errormssg No Specifies the error
message to display if
the rule is violated
during evaluation. If
this statement is not
specified, or if it is null,
a generic error
message displays.
Must be prepended with
an “And.”
Must be enclosed within
quotation marks.
remedy No Specifies a remedy for
the rule violation. This
text displays on the
evaluation screen.
Must be prepended with
an “And.”
Must be enclosed within
quotation marks.