HP StorageWorks 2.32 Edge Switch - Manual (Page 108)

Configuring SAN Products and Fabrics
108 HA-Fabric Manager User Guide
2. Click OK.
Unpersisting a Single Product
You can unpersist a single product in a persisted fabric if the product is no longer
part of the fabric. When a product is unpersisted, the connections associated with
that product are also removed. The persisted fabric’s data is updated with the
changes.
To unpersist a product, perform the following:
1. Right-click the product in the Physical Map or Product List, then choose
Unpersist Fabric. A confirmation box displays, as shown in Figure 52 .
2. Click OK.
Graphic Indicators Related to Persisted Fabrics
There are various ways to determine the status of persisted fabrics and persisted
products. Real-time changes to the fabric display on the Physical Map and the
Product List and are listed in the Fabric Log.
Determining a Persisted Fabric’s Status
The fabric’s status is reflected by the green circle indicator that displays on the
fabric icon on the Physical Map and in the Product List (
Figure 53 and Figure 54 ,
respectively). See “ Product Status Icons ” on page 272 for a list of status icon
definitions.
Figure 53: Persisted Fabric icon on Physical Map
Figure 54: Persisted Fabric icon on Product List