Setting a drivelock password – HP ProBook 4340s Notebook-PC User Manual
Page 86
Setting a DriveLock password
To set a DriveLock password in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
esc
while the “Press the ESC key for Startup Menu”
message is displayed at the bottom of the screen.
2.
Press
f10
to enter Computer Setup.
3.
Use a pointing device or the arrow keys to select Security > DriveLock, and then press
enter
.
4.
Click Set DriveLock Password (global).
5.
Use a pointing device or the arrow keys to select the hard drive you want to protect, and then
press
enter
.
6.
Read the warning. To continue, select YES.
7.
When prompted, type a master password, and then press
enter
.
8.
When prompted, type the master password again to confirm, and then press
enter
.
9.
When prompted, type a user password, and then press
enter
.
10.
When prompted, type the user password again to confirm, and then press
enter
.
11.
To confirm DriveLock protection on the drive you have selected, type DriveLock in the
confirmation field, and then press
enter
.
NOTE:
The DriveLock confirmation is case sensitive.
12.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press
enter
.
Your changes go into effect when the computer restarts.
76
Chapter 9 Security