HP p1130 21 inch CRT Monitor - Manual (Page 7)

HP 21” Color Monitor User’s Guide
Setting Up Your Monitor
6 English English
Setting Up Your Monitor
Where to Place the Monitor
Place your monitor on a flat sturdy surface. Ensure the operating site
is free from excessive heat, moisture, and sources of electromagnetic
fields. Sources of electromagnetic fields include transformers, motors
and other monitors.
Connecting the Cables
1 Before you connect any cables, refer to the safety instructions at
the beginning of this manual. Make sure your computer and
monitor are switched off.
2 Connect the video input cable (it has a 15-pin plug) to one of the
video outlets on your computer. You can use both outlets to
connect two computers.
3 Tighten the thumbscrews on the plug.
4 Connect the power cord to the monitor.
5 Plug the power cord into the power outlet.
NOTE The location of your computer's video cable connector may be
different to the one shown. Refer to the manual that came with your
computer, if necessary.
Video Cables
Power Cords
Video Cable
P4819A_us.fm Page 6 Friday, September 21, 2001 4:00 AM