Power, Technical specifications, Table a-2 – HP Integrity NonStop H-Series User Manual
Page 50: Power for tape drive, Table a-3
Specifications
M8505 Tabletop Tape Drive Installation and User’s Guide— 541949-002
A- 2
Power
Power
This tables lists power specifications for the tape drive.
Technical Specifications
This table lists technical specifications for the tape drive.
Table A-2. Power for Tape Drive
Input voltage
100-240 Vac +/- 10% full range
Input frequency
50 - 60 Hz
Input current
1.5 A (Max)
Maximum inrush current
60 A maximum for 230 Vac
30 A maximum for 115 Vac (at cold start)
Output Voltage
Load
Tolerance +/-
Ripple and
Noise
Regulation
+05 Vdc
0.0 A minimum
5.0 A maximum
3 %
50 m V
Line 2%
Load 3%
+12 Vdc
0.0 A minimum
1.9 A maximum
10%
120 m V
Line 2%
Load 10%
Table A-3. Technical Specifications
Tape format
Ultrium generation 3
Tape media
Read/Write Ultrium 2/3, Read Ultrium 1
Cartridge capacity
400 gigabytes native; up to 800 gigabytes compressed
Data transfer rate
40 megabytes per second native, 80 megabytes per second
compressed
Buffer size
128 megabytes
Data access time
53 seconds from beginning of media (average)
Rewind tape speed
7.0 m/s
Interface
Multimode short wave fiber-optic
Plug type
LC/LC