HP LaserJet Enterprise 600 Printer M603 series - Manual (Page 103)

Select an output bin
The product has four output locations: the top (standard) output bin, the rear output bin, the optional
stacker or stapler/stacker, and the optional 5-bin mailbox.
Print to the top (standard) output bin
The top output bin collects paper face-down, in the correct order. The top output bin should be used for
most print jobs, including transparencies. To use the top output bin, be sure that the rear output bin is
closed. To avoid jams, do not open or close the rear output bin while the product is printing.
Print to the rear output bin
The product always prints to the rear output bin if it is open. Paper that is printed to this bin will exit
face-up, with the last page on top (reverse order).
Printing from Tray 1 to the rear output bin provides the straightest path. Opening the rear output bin
might improve performance with the following items:
● Envelopes
● Labels
● Small custom-size paper
● Postcards
● Paper heavier than 120 g/m 2 (32 lb)
Opening the rear output bin makes the duplexer (if installed) and the top output bin unavailable. To
avoid jams, do not open or close the rear output bin while the product is printing.
ENWW Select an output bin 87