HP StorageWorks 2.32 Edge Switch - Manual (Page 261)

HA-Fabric Manager user guide 261
D Configuring remote workstations
This appendix describes the procedures for installing the HAFM application on a remote
workstation. To run HAFM on a remote workstation, you must first download and install the HAFM
application from the HAFM appliance.
This appendix describes the following topics:
• Windows systems , page 261
• Solaris systems , page 265
• HP-UX, AIX, and Linux systems , page 267
Windows systems
This section describes the procedures for installing HAFM on a remote workstation running
Windows 2000, Windows NT, or Windows XP.
Requirements
The download and installation process requires the use of a PC with the following minimum system
requirements:
• Operating system (one of the following):
• Windows 2000 Professional (with service pack 3 or above)
• Windows 2003
• Windows NT 4.0 (with service pack 6a)
• Windows XP (with service pack 1a)
• 1 GHz Pentium III processor
• 1 GB RAM
• 350 MB available disk space
• Video card supporting 256 colors at 800 x 600 resolution
• Ethernet network adapter
• Java-enabled web browser, such as Microsoft Internet Explorer (version 4.0 or later) or Netscape
Navigator (version 4.6 or later)
Newer versions of HAFM or Element Managers installed on the HAFM appliance are automatically
downloaded when the remote client logs in to the appliance.
Installation procedure
To install HAFM on a remote workstation:
1. Obtain the HAFM appliance address from your network administrator.
2. Open a web browser.
3. Enter the HAFM appliance address in the Location (or Address) field on the browser, and then
press Enter.