HP StorageWorks 2.32 Edge Switch - Manual (Page 167)

HA-Fabric Manager user guide 167
• Finding zones in a zone set , page 169
• Displaying zone members , page 169
• Saving the active zone set to a zoning library , page 170
• Comparing zone sets , page 170
Renaming a zone or zone set
To rename a zone or zone set:
1. Display the zone library. See ” Displaying the zone library ” on page 159.
The Zoning dialog box is displayed ( Figure 98 on page 159).
2. Right-click the zone or zone set that you want to rename and select Rename.
3. Enter the new name. See ” Zoning naming conventions ” on page 158.
4. Press Enter to save the new name.
Replacing zone members
You can replace zone members in one of two ways:
• Select the replacement zone member from the Potential Zone Member list.
• Specify the replacement member’s domain/port or WWN.
Using the Potential Zone Members list
To replace a zone member:
1. Display the zone library. See ” Displaying the zone library ” on page 159.
The Zoning dialog box is displayed ( Figure 98 on page 159).
2. Select the member you want to replace from the Potential Zone Members list.
3. Click Find to find all instances of the member in the configured zones.
4. Click to the right of the Potential Zone Members list to remove the member from the zones.
5. Select the replacement member from the Potential Zone Members list.
6. Click to the right of the Potential Zone Members list to add the member to the zones.
7. Click OK.
Using the domain/port or WWN
To replace a zone member:
1. Display the zone library. See ” Displaying the zone library ” on page 159.
The Zoning dialog box is displayed ( Figure 98 on page 159).
2. Right-click the member you want to replace and select Replace, or right-click in the Zones area
and select Replace All.