HP StorageWorks XP Remote Web Console Software - Manual (Page 11)

Data Integrity Check XP for the XP12000/XP10000/SVS200 user guide 11
2 Data Integrity Check Operating Environments and
Prerequisites
Data Integrity Check requires the following:
• A Command View XP array (see ” Requirements for the array ” on page 11)
• A Host server that supports an Oracle database and has RAID Manager installed (see
”
Requirements for the Host Server ” on page 11)
• An Oracle-data validation service (see ” Restrictions and Conventions ” on page 12
Requirements for the array
Data Integrity Check requires a properly configured array and a channel adapter with the correct
microcode.
Channel Adapter (CHIP)
Data Integrity Check supports the following CHIP types:
• DKC-F510-32HS (16 ports/PCB)
• DKC-F510-16HS (8 ports/PCB)
CAUTION: If CHIPs are used that do not support Data Integrity Check are used with CHIPs that do
support Data Integrity Check, the validity of the data is not checked when the data processed with
the unsupported CHIPs. HP recommends you to update all the CHIPs so that they would support
Data Integrity Check.
Data Integrity Check License Key
You need to install the license key for Data Integrity Check on the array using Remote Web Console.
To install the license key, refer to the
HP StorageWorks XP Remote Web Console user guide.
Requirements for the Host Server
You will need the following items installed on the host server:
Fibre channel interface
A fibre channel connection is required between the host server and the array.
RAID Manager
RAID Manager version 01-16-03/05 or better is required.
Operating System
One of the following operating systems is required.