Device does not turn on, Is power reaching the device – HP LaserJet 3020 All-in-One Printer User Manual
Page 100

Device does not turn on
Try the tips in this section if the device does not turn on.
Is power reaching the device?
●
If you are using a power strip, make sure that the power strip is turned on. Or, try plugging
the device directly into the power outlet.
●
Test the power outlet to make sure that it is working.
●
If you have plugged the device into a switched outlet, make sure that the switch is on.
●
Make sure that the power is turned on.
WARNING!
If the problem persists after you try the preceding remedies, the device might be experiencing a
mechanical failure. Unplug the device from the power outlet and contact HP. See the support
flyer that came with the device for information about contacting HP.
90
Chapter 8 Troubleshooting
ENWW
This manual is related to the following products: