HP LD4730 47-inch Micro-Bezel Video Wall Display - Manual (Page 35)

5. The menu list updates with the new Display Name and Display Location.
Figure 3-45 Changed Display Name and Display Location Information
6. If the fields are not changed to the new information after clearing the confirmation message, click
Search to refresh the display list in the menu. The new information should appear.
Update Firmware
HP digital signage displays (that support VOE) have firmware that communicates with the VOE software
running on networked players.
The VOE firmware can be updated without affecting other operations of the display, although the
display must be free (VOE status is Ready to Connect) during the upgrade.
The VOE firmware comes with the software and is placed in the VOE program folder (Location:
Program Files\HP\Video Over Ethernet), unless the user specified a different location when the VOE
software was installed. Firmware updates are made available on the Web site: http://www.hp.com/
support . Select applicable country or region and language. From the Support and Drivers page, select
Product Support and Troubleshooting. Enter the name of the display model.
Start the upgrade process by getting the new firmware. Download the file to the player and write down
the name of the directory where the file was saved. Then proceed as follows:
1. Log on as an Administrator.
2. Highlight the display to be upgraded. It must have the status Ready to Connect.
Administrator Mode 31