Change an association – HP LD4730 47-inch Micro-Bezel Video Wall Display User Manual

Page 25

Change an Association

Administrator Mode allows the user to change the association of any display with any player. The

process is very similar to making an association with an available display (Ready to Connect) in User

Mode, except the user may choose any Connected display on the list. To change an association and

connection:

Select the display whose association and connection are to be changed by clicking on the

association box.

Figure 3-24

Select Display to Change Association and Connection

The Change Association dialog box appears. Click on the pull-down menu which shows all the

players in the network. Select the new player to associate and connect with this display. Click OK

to keep the new association and make the new connection between the display and changed

player.

Figure 3-25

Select the New Player for Association and Connection

Administrator Mode

This manual is related to the following products: