HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 49)

Using QuickLoop Zones
49 Zoning Version 3.1.x/4.1.x User Guide
To Specify by AL_PA
Specify the QuickLoop zone name, in quotes, with the QuickLoop name and
desired AL_PAs, in quotes. All AL_PAs must be associated with a QuickLoop
name. For example:
Zonecreate “QLZoneName”, “qloop1[01,02,04,e0,e1,e2]”
To specify a Combination of looplet and AL_PA
Example:
Zonecreate “QLZoneName”, “0,2; 0,3; qloop1[ca,cb,e1,e2]”
Define a QuickLoop Zone Configuration
To define a QuickLoop zone configuration, assign a zone configuration name and
specify the QuickLoop zones to be included, by zone name. The QuickLoop
names of the QuickLoop zones must also be included in the zone configuration.
An example of a QuickLoop zone configuration is:
cfgname “cfgname”, “QLZoneName”
For example:
cfgname “QLconfig_1”, “QLZoneName”, “qloop1[01,02,04,e0,e1,e2]”
cfgenable “QLconfig_1”