beautypg.com

Changing the admin user name and password – Actiontec electronic DSL GATEWAY GT704 User Manual

Page 38

background image

34

Actiontec USB/Ethernet DSL Gateway User Manual

35

Chapter 3 Performing a Basic Setup

6. Click the Save and Restart button in the “Save and Restart” screen.

7. The “Congratulations” screen appears. The Gateway is successfully configured.

The Power light flashes rapidly while the Gateway restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green. The
Gateway is now configured and users can start surfing the Web.
If an error stating the Web browser was unable to connect to the Internet appears,
check the configuration settings. Ensure all the information required by the

ISP

was

entered correctly.

Changing the Admin User Name and Password

To create or change the admin user name and password, controlling access to the
Gateway’s Web Configurator screens, follow these instructions:

1. From the Setup/Configuration screen, select Admin Username/Password

from the menu on the left side.