Ip address, voe setup (command: v f), Auto off (command: f g), Subnet mask, voe setup (command: v g) – HP Pantalla LED de 55 pulgadas HP LD5535 Digital Signage User Manual

Page 109

Text mode
Original mode

f4 : read 4th index of On Time Input
Data2
Data (Hex) INPUT
07 : RGB
08 : HDMI(DTV)
09 : HDMI(PC)
0a : Display port (DTV)
0b : Display port (PC)
0c : VOE(PC)
0d : VOE(DTV)
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data 1][Data 2][x]

48. IP Address, VOE Setup (Command: v f)

Set the IP address for VOE.
Transmission
[v][f][ ][Set ID][ ][Data][Cr]
Data (Add schedule)
The data is always ff(in Hex).
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
Data
"hhhhhhhh" where h is a hex value

49. Auto Off (Command: f g)

Set Auto Detection.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]

50. Subnet mask, VOE Setup (Command: v g)

To set the subnet mask for VOE.
Transmission

Transmission / Receiving protocol 99