Using the button scan mode feature – Asus 54Mbps Pocket Wireless Access Point WL-330g User Manual
Page 48
3-24
Chapter 3: Configuration
Channel. Select the channel used by the AP (Infrastructure) or the wireless
device (Ad-hoc) to establish connection.
Station Mode. This field allows you to select the device wireless standard
while in Ethernet adapter mode. Selecting 802.11b/g allows the device to
connect to both wireless standards.
Transmission Rate. This field allows you to adjust the data transmission
rate between the WL-330g and the AP/wireless device.
Preamble. See page 3-14.
Authentication Method. See page 3-15.
Encryption. See page 3-15.
Pass Phrase. See page 3-16.
Default Key. See page 3-16.
MAC cloning. MAC cloning allows the ASUS Pocket Wireless AP to use the
MAC address of the host computer in communicating with other wireless
devices. MAC cloning supports certain software applications and devices
such as Xbox and PlayStation
®
2 game consoles.
Using the Button Scan Mode feature
The Button Scan Mode allows you to use the reset button to connect to an
access point (Infrastructure mode) or wireless device (Ad-hoc mode) saved
in the Profile Table of the configuration utility or in your location.
You must save at least one wireless connection profile before using the
Button Scan Mode.
Save the profile of the wireless connection using the Site Survey window.
See the next section for details.