Asus 54Mbps Pocket Wireless Access Point WL-330g - Manual (Page 31)

ASUS Pocket Wireless Access Point (WL-330g) 3-7
1. The utility auto-detects and
displays the WL-330g Ethernet
adapter settings. Click Configure
to continue.
2. Log on to the configuration
window using the password
(admin), check the Remember
my password option, then click
OK.
To set the device as an Ethernet adapter
Make sure that you switched the WL-330g to Ethernet adapter mode
before launching the Wireless Setting Utility. Use the mode switch to
change the device operating mode.
3. Select a wireless network from
the Available Networks field,
then click Configure.
• Each wireless network is
preceded by an icon for
easy identification. Refer
to the table on the next
page for icon indications.
• Click Add to connect to
another wireless network
not listed in the field.