HP StorageWorks 1500cs Modular Smart Array - Manual (Page 21)

HP StorageWorks Interfaz de línea de comandos de HP StorageWorks Modular Smart Array 1000/1500 - guía de usuario 21
Comando show connections y respuesta de ejemplo
NOTA: Utilice el comando
show connections
para comprobar que todas las conexiones al MSA se
han reconocido y definido, incluso el tipo de perfil.
CLI> show connections
Connection Name:
Host WWNN = 11111111-11111111
Host WWPN = 22222222-22222222
Profile Name = Windows
Unit Offset = 0
Controller 1 Port 1 Status = Online
Controller 2 Port 1 Status = Offline
Connection Name:
Host WWNN = 33333333-33333333
Host WWPN = 44444444-44444444
Profile Name = Windows
Unit Offset = 0
Controller 1 Port 1 Status = Online
Controller 2 Port 1 Status = Offline
Comando show preferred_path y respuesta de ejemplo
CLI> show preferred_path
Controller 1 (this_controller) is the current optimal path for these units;
0,1,4,5
Controller 2 (other_controller) is the current optimal path for these units;
2,3,6,7
Implicit (automatic load-based) LUN ownership changes are currently
DISABLED.
Controller 1 (this_controller) is the explicit power-up path for these
units; 0,1,4,5
Controller 2 (other_controller) is the explicit power-up path for these
units; 2,3,6,7