Libxml2, Libicu, Libuuid – HP StoreEver Ultrium Tape Drives User Manual
Page 10: Libxml2 libicu libuuid
Before starting to install and use HP StoreOpen Automation, you must ensure that the FUSE kernel
module is present and loaded. To check, execute the following command:
$ lsmod | grep fuse
If the module is not currently loaded, you can load it as follows:
$ modprobe fuse
libxml2
Table 2 libxml2 site and filename details
Potentially compatible versions
Site
Operating system
libxml2-2.6.16
and
libxml2-2.6.26
RHEL 5.0 update 5 and later (x86 and
x64)
libxml2-2.6.16
and
libxml2-2.6.26
RHEL 6.0 up to update 4 (x86 and
x64)
libxml2-2.6.16
and
libxml2-2.6.26
SLES 11 up to SP3 (x86 and x64)
not required
not required
Mac OS X 10.6 through 10.9
Instructions, comments:
Installs as an rpm, but be prepared for installation issues since other software may have
dependencies on other versions of this package.
Be prepared for the rpm command to appear to hang for a minute or two before reporting successful
status.
libicu
Table 3 libicu site and filename details
Potentially compatible versions
Site
Operating system
ICU 3.6
and ICU 4.2
RHEL 5.0 update 5 and later (x86 and
x64)
ICU 3.6
and ICU 4.2
RHEL 6.0 up to update 4 (x86 and
x64)
ICU 3.6
and ICU 4.2
SLES 11 up to SP3 (x86 and x64)
ICUFramework-4.0.1.pkg
Provided with the HP StoreOpen
Automation package
Mac OS X 10.6 through 10.9
Instructions, comments:
Find the readme file in the download and follow the process as closely as you can.
libuuid
Table 4 libuuid site and filename details
Potentially compatible versions
Site
Operating system
e2fsprogs 1.36
and e2fsprogs
1.39
RHEL 5.0 update 5 and later (x86 and
x64)
e2fsprogs 1.36
and e2fsprogs
1.39
RHEL 6.0 up to update 4 (x86 and
x64)
10
Installation and configuration