Adaptec ATA II 1220SA - Manual (Page 75)

Glossary ●
93
stripe size
The amount of data in each section of a striped array.
striped array
See
RAID 0 , RAID 10 .
T
task
An operation that occurs only on the RAID controller, asynchronous to all other operations; for example,
initializing a disk or verifying an array. Some tasks can take an extended period of time, particularly if the
RAID controller is also performing intensive data I/O while the task is running.
V
verify
Low-level check that a drive, logical device, or hot spare is good. In a RAID 1, verify is a low-level check that
contents of both members’ segments are consistent and, optionally, corrects errors while assuming that the
master drive is correct. In a simple volume, verify performs a low-level check that the whole drive can be
read.
volume
See
simple volume , spanned volume .