AEG Lavamat 74900 - Manual (Page 13)

Cancelling the delayed start
• Depress START PAUSE button.
• Depress DELAY TIMER button until the the symbol 0’ is displayed.
• Depress START PAUSE button again to restart the machine
. • To modify the delay time, after the programme has already started,
turn the selector dial to OFF (RESET) in order to cancel the current
washing programme, set a new programme again and select the new
desired delay time.
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START PAUSE button.
When these buttons are pressed, the corresponding pilot lights come
on. When they are pressed again, the pilot lights go out.
SPIN SPEED
Press this button to reduce the maximum speed of the final speed pro-
posed by the machine for the selected programme or to select option
RINSE HOLD. The corresponding light illuminates.
The maximum spin speed for COTTONS, LINEN/EASY
CARES programmes, 40-60 MIX, ENERGY SAVING and
SPIN programme is 1400 rpm.
For DELICATE SPIN, DELICATES, WOOL (Hand-
wash) /SILK , REFRESH 30 and
EASY IRON the spin speed is 1000 rpm.
RINSE HOLD
By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing.
When the programme has finished, the START PAUSE button goes off,
the END pilot light and the DOOR light (in red) on the programme
progress display remain alight, the display shows a static
0 and
the door is locked to indicate that the water must be emptied out.
To empty out water there are two possibilities:
• Select programme DRAIN:
The water is emptied out without spinning.
• Select programme SPIN or DELICATE SPIN. Select the spin speed by
13
Description of the appliance
1400
1000
700
500
RINSE HOLD
132978470 UK.qxd 21/02/2007 14.33 Pagina 13