Aroma ADF-198 - Manual (Page 11)

NO TA :
CLEANING
To Clean Oil Tank, Fryer Lid and Fry Basket:
Always unplug unit and allow to cool completely before cleaning.
1. Wash the basket and lid with a sponge or dishcloth in warm, soapy
water.
2. To clean the enamel oil pot, pour warm water and dish soap into the
pot and use a sponge or dishcloth to remove grease. Empty the pot
and rinse with warm water.
3. Dry the pot completely before next use.
4. Clean the body of the fryer with a damp cloth.
5. To clean the heating element, rinse with water or immerse in soapy
water. Wipe with a damp cloth and dry thoroughly before next use.
NOTE:
• Do not use harsh abrasive cleaners or products that are not
considered safe to use on nonstick coatings.
• Do not attempt to cool the unit by pouring cold water into the pot.
• Do not immerse the electrical unit in water or any other liquid.
Changing Filters:
It is recommended that the carbon filter (black) be changed every 6
months and the vapor filter (white) once a year. These recommendations
are approximate and the filters should be changed depending on
amount of usage. To change, unclip the filter cover, remove filters and
replace with new ones.
To order replacement filters, visit www.AromaCo.com or contact Aroma
customer service at 1-800-276-6286.
CÓMOLIMPIAR
Cómolimpiar eltanque deaceite, latapa dela
freidoray lacanasta parafreí r:
Antesde limpiarla, siempredesenchufe launidad ydeje quese
enfríepor completo.
1. Laveel canastoy latapa conuna esponjao trapopara vajillacon
aguajabonosa tibia.
2. Paralimpiar elrecipiente interno,coloque aguacaliente y
detergentedentro delrecipiente yutili ceuna esponjao trapopara
vajillaa finde quitarla grasaadherida. Vacíeel recipientey
enjuaguecon aguatibia.
3. Sequeel recipiente completamenteantes delpróximo uso.
4. Limpieel armazónde lafreidora conun pañohúmedo yluego
séquelo.
5. Paralimpiar elelemento calefactor,enjuáguelo conagua o
sumérjaloen aguajabonosa. Limpiecon unpaño húmedoy seque
completamenteantes delpróximo uso.
9
•No utilicelimpiadores abrasivoso productosque noestén
recomendados parasuperficies antiadherentes.
•No intenteenfriar launidad colocandoagua fríadentro del
recipiente.
•No sumerjala unidadeléctrica enagua oen ningúnotro líquido.
Cómocambiar elfi ltro :
Sereco miendacambiar elfiltro paracarbón (negro)cada 6meses yel
filtrode vapor(blanco) unavez alaño. Estasrecome ndacionesson
aproximadas.Los filtrosdeben reemplazarsede acuerdocon la
frecuenciade usodel aparato.Para cambiarlos,desenganche latapa
defiltros, retire losfiltros yreemplácelos porfiltros nuevos.
9