beautypg.com

Troubleshooting – Acesonic KOD-1000 User Manual

Page 23

background image

23

SPEAKER SETUP

1. Press SETUP KEY to open the Setup MENU.
2. Press Direction KEY [◀▶] to select the

SPEAKER SETUP.

The SUB-MENU contains:

DOWN MIX

(LT/RT,STEREO,VSS,OFF)
SUBWOOFER
CENTER DELAY
REAR DELAY
BASS MODE

Down Mix Definitions:

LT/RT: This mode allows Dolby Pro Logic stereo

effects.
STEREO: This mode will not affect discs encoded

for playback in stereo, but choosing it for 5.1 sur-

round sound discs will play only the audio of the

front speaker channels (front left, center, front

right).
VSS: This mode will mix the sounds of 5.1 surround

sound discs, and simulate its sound effects.
OFF: This mode will allow the use of a 5.1 surround

sound amplifier.

DIGITAL SETUP

1. Press SETUP KEY to open the Setup MENU.
2. Press Direction KEY [◀▶] for DIGITAL

SETUP.

The SUB-MENU contains:

OP MODE

(LINE OUT/RF REMO)
DYNAMIC RANGE

(FULL, 6/8, 4/8, 2/8 and OFF)
DUAL MONO

(STEREO, MONO L/R, MIX MONO)

Troubleshooting

For common problems, please consult the chart below.

If these suggestions do not solve your problem, please

call Acesonic Customer Service at (626) 820-0645.
No Sound

• Inspect the KOD-1000 to confirm it is connected

to audio equipment and that the audio equipment

or TV is connected to the player.
• Check that volume levels on TVs and audio equip-

ment are audible.
• Check the cables connecting the player to audio

equipment or TV.

No Picture

• Check connections between TV and KOD-1000.
• Check the TV to see if its on the correct input or

channel to view the player.

Distorted Sound

• Check connections on the KOD-1000 and audio

equipment or television.
• Check input and volume settings on the audio

equipment or television.

Distorted Picture

• Check connections between TV and KOD-1000.
• Check the TV to see if its on the correct input or

channel to view the player.
• Select one video output — RCA Video, S-Video

or Component Video – and inspect the video cord.

Selected Song Won’t Play in Hard Disk Drive Mode

• Check tray that there is no disc loaded.