Os driver installation, 5 sco openserver 5.0.x, I. adaptec – Asus Dual TualatinTM Motherboard TRL-DLS User Manual
Page 83: Scsi driver installation
ASUS TRL-DLS User’s Manual
83
5. OS Driver Installation
5. Driver Installation
SCO OpenServer
5.5
SCO OpenServer 5.0.x
I.
Adaptec
®
SCSI Driver Installation
SCO Open Server 5.0.x does not include the drivers for the Adaptec SCSI controller.
You must create a driver disk prior to SCO OpenServer installation.
NOTE:
Prepare one blank formatted high density floppy disk. Label the
disk “Ultra160 FMS v1.11 for SCO Unixware 2.1x Setup Disk” or
“Ultra160 FMS v1.11 for SCO Unixware 7.x Setup Disk” or
“Ultra160 FMS v1.11 for SCO OpenServer 5.0.x Setup Disk”.
A. Preparing an Adaptec Driver Disk
1.
Insert the ASUS TRL-DLS support CD into your CD-ROM drive.
2.
Run the Adaptec Disk Creation Utility from the following path:
\Drivers\Adaptec\fmsutil.exe
3.
Select Ultra160 FMS 1.11 from the options that appear. Press Enter to
display the following.
4.
Select SCO Unixware 2.1x, 7.x, OpenServer 5.0.x. Press Enter.