Asus Dual TualatinTM Motherboard TRL-DLS - Manual (Page 44)

ASUS TRL-DLS User’s Manual 44
4. BIOS SETUP
4. BIOS SETUP
4.3.1 Primary & Secondary Master/Slave
Type [Auto]
Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection
is successful, Setup automatically fills in the correct values for the remaining fields
on this sub-menu. If automatic detection fails, this may be because the hard disk
drive is too old or too new. If the hard disk was already formatted on an older system,
Setup may detect incorrect parameters. In these cases, select [User Type HDD] to
manually enter the IDE hard disk drive parameters. Refer to the next section for
details.
CAUTION! Before attempting to configure a hard disk drive, make sure you
have the correct configuration information supplied by the drive manufacturer.
Incorrect settings may cause the system to fail to recognize the installed hard
disk.
Halt On [All Errors]
This field specifies the types of errors that will cause the system to halt. Configuration
options: [All Errors] [No Error] [All but Keyboard] [All but Disk] [All but Disk/
Keyboard]
Installed Memory [XXX MB]
This field automatically displays the amount of conventional memory detected by
the system during the boot process.
Master/Slave Devices