Asus Dual TualatinTM Motherboard TRL-DLS - Manual (Page 56)

ASUS TRL-DLS User’s Manual 56
4. BIOS SETUP
4. BIOS SETUP
Power Menu
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the power has
been interrupted. [Disabled] leaves your system off. [Previous State] reverts your
system to the same state before the power interruption. Configuration options:
[Disabled] [Previous State]
Wake/Power Up On Ext. Modem [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call. Configuration options: [Disabled] [Enabled]
NOTE: The computer cannot receive or transmit data until the computer
and applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the computer
is off causes an initialization string that turns the system power on.
Onboard LAN Power Up [Disabled]
Power Up on PCI Card [Disabled]
These fields allow you to boot your computer from another computer by sending a
wake-up frame or signal to the LAN device, or the PCI modem card if present.
Configuration options: [Disabled] [Enabled]
4.5.1 Power Up Control
IMPORTANT: This feature requires an optional network interface card with Wake-
On-LAN feature and an ATX power supply with at least 720mA +5V standby
power.