Asus Dual TualatinTM Motherboard TRL-DLS - Manual (Page 30)

30
3. HARDWARE SETUP
ASUS TRL-DLS User’s Manual
3. H/W SETUP
Connectors
10) ATX Power Connector (20/24-pin block ATXPWR, 8-pin CON12V)
The 20/24-pin connector is for an ATX power supply with 20/24-pin power
connector. The connector from the power supply is designed to fit this connector
in only one orientation. Find the proper orientation and push down firmly until the
plug completely fits in.
The 8-pin +12V connector is for ground.
IMPORTANT: Make sure that your ATX power supply can supply at least 720mA
on the +5-volt standby lead (+5VSB). The system may become unstable and
may experience difficulty powering up if the power supply is inadequate.
It is recommended that you purchase a power supply with 24-pin power connector.
TRL-DLS
®
TRL-DLS ATX Power Connector
GND 12V
GND 12V
GND 12V
GND 12V
For Power Supply
with 20-pin
Power Connector
24-pin Power Connector
CON12V
+3 V
olts
+3 V
olts
Ground +5 V
olts
+5 V
olts
Ground Ground Power OK +5V Standby +12 V
olts
-5 V
olts
+5 V
olts
+3 V
olts
-12 V
olts
Ground Ground Ground PSON# Ground +5 V
olts
+12 V
olts
+3 V
olts
+5 V
olts
1
Ground
ATXPWR
4-pin
8-pin