Audiovox CDM-8900 - Manual (Page 7)

C
H
1
1 Plug the AC charger into a
standard outlet.
BATTERY CHARGING
POWER CONNECTION
11
C
H
1
BATTERY INSTALLATION
1 u
Place the battery on the back of the handset
and slide into place.
v
Push the battery down
until it locks into place.
BATTERY REMOVAL
1 u
Pull down the release latch, lift up the
battery and
v
remove the battery from the
handset.
Make sure the battery is securely placed to avoid slipping off
during a call.
If the battery is not correctly placed in the compartment, the
handset will not turn on and/or the battery may detach during use.
10
BATTERY USAGE BATTERY USAGE
• These times are for a new battery. Talking and Standby times may
decrease over time.
• Fully charge the battery before using – it is not charged when
purchased.
• It is more efficient to charge the battery with the phone turned off.
These times are for a new battery. Talking and Standby times may
decrease over time.
1X
Phone is in the 1x service area.
Analog Mode
Phone is operating in analog mode.
DCS PCS AMPS
190m 200m 80m
310m 350m 130m
STD 1000 mAh
Battery
EXT 1700 mAh
BATTERY TALK TIMES
The operating time is subject to your handset usage and configuration.
AMPS CDMA
20hour 140hour
35hour 240hour
STD 1000 mAh
Battery
EXT 1700 mAh
BATTERY STANDBY TIMES
The operating time is subject to your handset usage and configuration.