Asus P5GL-MX User Manual

Page 69

A S U S P 5 G L - M X

2 - 2 3

Enhanced C1 Control [Auto]

When set to [Auto], the BIOS will automatically check the CPU’s capability
to enable the C1E support. In C1E mode, the CPU power consumption is
lower when idle. Configuration options: [Auto] [Disabled]

Hardware Prefetcher [Enabled]

Enables or disables the Hardware Prefetcher feature.
Configuration options: [Disabled] [Enabled]

Adjacent Cache Line Prefetch [Enabled]

Enables or disables the Adjacent Cache Line Prefetch feature.
Configuration options: [Disabled] [Enabled]

CPU Internal Thermal Control [Auto]

Disables or sets the CPU internal thermal control.
Configuration options: [Disabled] [Auto]

Hyper-Threading Technology [Enabled]

Allows you to enable or disable the processor Hyper-Threading Technology.
Configuration options: [Disabled] [Enabled]

The following item appears only when you installed an Intel

Pentium

CPU that supports the Enhanced Intel SpeedStep

Technology (EIST).

Intel(R) SpeedStep Technology [Automatic]

Allows you to use the Enhanced Intel

SpeedStep

Technology. When set

to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature. Set this item to [Disabled] if you do not
want to use the EIST. Configuration options: [Automatic] [Disabled]

2.4.4

Chipset

The Chipset menu allows you to change the advanced chipset settings.
Select an item then press to display the sub-menu.

Advanced Chipset Settings

Configure DRAM Timing by SPD

[Enabled]

Graphic Adapter Priority

[PCI/Int-VGA]

Pre-allocated Graphics Memory

[Enabled, 8MB]

Graphics memory type

[Auto]

•

Refer to the Appendix for details on how to use the EIST feature.

•

The motherboard comes with a BIOS file that supports EIST.