Asus P5GL-MX User Manual
Page 28
1 - 1 6
1 - 1 6
1 - 1 6
1 - 1 6
1 - 1 6
C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
1.7
System memory
1.7.1
1.7.1
1.7.1
1.7.1
1.7.1
Overview
Overview
Overview
Overview
Overview
The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
1.7.2
1.7.2
1.7.2
1.7.2
1.7.2
Memory Configurations
Memory Configurations
Memory Configurations
Memory Configurations
Memory Configurations
You may install 256 MB, 512 MB and 1 GB unbuffered non-ECC DDR DIMMs
into the DIMM sockets using the memory configurations in this section.
•
Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot -ure. Use any of the
recommended configurations in Table 1.
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor. See Table 2 for qualified DDR DIMMs.
•
Due to chipset limitation, DIMM modules with 128 Mb memory chips
or double-sided x16 memory chips are not supported in this
motherboard.
P5GL-MX
®
P5GL-MX 184-pin DDR DIMM sockets
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2