Asus M2N-MX SE PLUS - Manual (Page 67)

ASUS M2N-MX SE PLUS 2-23
Channel Interleaving [Auto]
Allows you to enable or disable channel memory interleaving.
Configuration options: [Disabled] [Auto]
Enable Clock to All DIMMs [Disabled]
Allows you to enable or disable the Unused Clocks to DIMMs Even Memory
Slots are not populated. Configuration options: [Disabled] [Enabled]
MemCLK Tristate C3/ATLVID [Disabled]
Allows you to enable or disable the MemCLK Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable the Memory Remapping Around Memory
Hole.Configuration options: [Disabled] [Enabled]
Unganged Mode support [Enabled]
Allows you to enable or disable the Force Unganged mode.
Configuration options: [Disabled] [Enabled]
Power Down Control [Auto]
Allows DIMMs to enter power down mode by deasserting the clock enable signal
when DIMMs are not in use. Configuration options: [Auto] [Disabled]