Alliance Laundry Systems BF50PV - Manual (Page 16)

Installation
14
F232058
Machine Dimensions
See Figure 2 for dimensions of the 35-pound
capacity models. See Figure 3 for dimensions
of the 50-pound capacity models. See Figure 4
for dimensions of the 85-pound capacity
models.
Dimensional Clearances
The table below shows recommended
minimum clearances on all sides of the
washer-extractor.
Note: The dimensions shown here are for
planning purposes only. They are approximate
and subject to normal manufacturing
tolerances. If exact dimensions are required for
construction purposes, contact the distributor
or manufacturer. We reserve the right to make
changes at any time without notice.
Recommended Minimum Clearances
35 50 85
Minimum rear clearance, in. (mm) 18 (450) 18 (450) 18 (450)
Minimum clearance between machine and wall, in. (mm) 6 (150) 6 (150) 6 (150)
Minimum clearance between machines (side), in. (mm) 1 (25.4) 1 (25.4) 1 (25.4)
Minimum front clearance, in. (mm) 21 (533) 23 (584) 23 (584)