LG PA75U - Manual (Page 5)

5 SAFETY INSTRUCTIONS
CAUTION
y y When installing the projector on a
table, be careful not to place it near
the edge.
- The projector may fall causing injury
to persons or product malfunction.
Make sure that you use the cabinet
or stand that fits the projector.
y y Disconnect the projector from the
power supply and all connected ap-
paratus before moving the projector.
- Otherwise, the power cord may be
damaged causing fire or electric
shock.
y y Do not place the projector on an
unstable or vibrating surface such as
a wobbly shelf or a slope.
- It may fall or flip and cause injury.
y y Be careful not to tip or drop the pro-
jector over when connecting external
devices to the projector.
- This may cause injury to persons or
damage to the projector.
Power
WARNING
y y The grounding wire should be con-
nected.
- Be sure to connect the grounding
wire to avoid damage to the projec-
tor or electric shock when there is a
short circuit.
If it is not possible to ground the unit,
purchase a circuit breaker and con-
nect the projector to its wall outlet.
Do not try to ground the projector to
the gas pipe, water pipe, lightning
rod, or telephone line, etc.
y y The power plug should be inserted
fully into the power outlet.
- An unstable connection may cause
fire.
y y Do not place heavy objects on the
power cord.
- This may cause fire or electric
shock.
y y Never touch the power plug with a
wet hand.
- This may cause electric shock.
y y Do not plug too many devices into
one multi-power outlet.
- This may cause fire due to the
power outlet overheating.
y y Remove dust or contaminants around
power plug pins or wall outlets.
- Failure to do so may cause fire.
y y To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.