Using the keystone function, Using the input list, Using the keystone – LG PA75U User Manual

Page 33: Function

WATCHING WITH THE PROJECTOR

Using the Keystone

Function

If the projector is not at a right angle to
the screen, you can use the trapezoidal
setting to adjust the screen.
Because the

Keystone function may

cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.

•Keystone 0

Press the

Key'sꔌ or Key'sꔍ button

to adjust the screen.

Keystone can be adjusted from -40

40.

Press the

OK button after adjust-

ment.

Using the Input List

Press the

INPUT button to access the

input sources.
- The connected input mode appears

first. Please note that the external
input and component are always
enabled.

Select an input signal using the

IN-

PUT button. The projector is switched

only to the connected input mode.

You can use the

︿ or ﹀ button to

switch between all the input modes.

Adding an Input Label

Displays which devices are connected to
which input ports.

Press the

INPUT button to access the

input sources.

Press the

RED button.

Use the

︿ or ﹀ button to scroll to

one of the input sources.

Use the

︿, ﹀, ︿ or ﹀ button to

select a device name.