LG BD590 User Manual

Page 103

103

Appendix

is outputted for BD-ROM discs, and the
original audio is outputted for the other
discs (like [Primary Pass-Thru]).

• If [HDMI] option is set to [PCM Multi-CH]

and [Digital Output] option is set to [Primary
Pass-Thru] while playback Dolby Digital Plus
or TrueHD audio, DIGITAL AUDIO OUT is
limited to “PCM 2ch”.

• If the HDMI connection is version 1.3

and Dolby Digital Plus/Dolby TrueHD is
outputted from HDMI OUT jack, DIGITAL
AUDIO OUT jack is limited to “PCM 2ch”
(When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).

• The audio is outputted as PCM 48 kHz/16

bit for MP3/WMA fi le and PCM 44.1kHz/16
bit for Audio CD while playback.

• The Dolby TrueHD audio recorded on some

Blu-ray discs consists of Dolby Digital and
TrueHD audio. Dolby Digital audio is output
through DIGITAL AUDIO OUT jacks and “DD
” displays on the screen if TrueHD audio is
not output (for example, when [HDMI] is set
to [PCM Stereo] and [Digital Output] is set
to [Primary Pass-Thru]).

• You must select a digital audio output and

a maximum sampling frequency that your
Amplifi er (or AV receiver) accepts using
[Digital Output], [HDMI] and [Sampling
Freq.] options on the [Setup] menu (see
page 29-30).

• With digital audio connection (Digital

Output or HDMI), Disc Menu button sounds
of BD-ROM may not be heard if the [Digital
Output] or [HDMI] option is set to [Primary
Pass-Thru].

• If the audio format of the digital output

does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.

• Multi-channel Digital Surround Sound via

digital connection can only be obtained
if your receiver is equipped with a Digital
Multi-channel decoder.

BD592-N-BUSALLK-ENG.indd 103

10. 10. 20

10:30

10. 10. 20

10:30