LG BG630 - Manual (Page 62)

62 SERIAL COMMUNICATION FUNCTION
08. Sharpness (Command: kk)
⇒
Adjusts the sharpness.
It is disabled when Black Mode is
selected.
Transmission
[k][k][][Set ID][][Data][Cr]
Data Min: 0H - Max: 32H
(*Transmitted in hexadecimal code)
* See the data structure.
Ack
[k][][Set ID][][OK][Data][x]
Data Min: 0H - Max: 32H
10. Key Lock (Command: km)
⇒
To Set the function of locking the remote
control and front panel control on the
projector.
Transmission
[k][m][][Set ID][][Data][Cr]
Data 00 : Disables the key lock.
01 : Enables the key lock.
Ack
[m][][Set ID][][OK][Data][x]
Data 00 : Disables the key lock.
01 : Enables the key lock.
* This function is configured when the keys on
the remote control or control panel are not
used. If the unit is fully discharged after its
power plug is pulled out of a wall outlet, the
LOCK function is cleared.
* If the unit is in the key lock standby mode, the
projector will not respond to the power button
on the remote control or control panel.
11. Color Temperature (Command: ku)
⇒
Adjusts the value of color temperature.
It is disabled when Black Mode is
selected.
Transmission
[k][u][][Set ID][][Data][Cr]
Data 00: Medium 01: Cool
02: Warm 04: Natural
(*Transmitted in hexadecimal code)
*Data 03 is not used.
Ack
[u][][Set ID][][OK][Data][x]
Data 00: Medium 01: Cool
02: Warm 04: Natural
09. OSD Control (Command: kl)
⇒
Selects OSD On/Off.
Transmission
[k][l][][Set ID][][Data][Cr]
Data 00: OSD selection mode off
01: OSD selection mode on
Ack
[l][][Set ID][][OK][Data][x]
Data 00: OSD selection mode off
01: OSD selection mode on