LG BG630 - Manual (Page 48)

48 CUSTOMIZING SETTINGS
OPTION Settings
1
Press the SETTINGS button.
2
Use the ︿, ﹀, ︿, or ﹀ button to select OPTION
and press the OK button.
3
Use the ︿, ﹀, ︿, or ﹀ button to set up a desired
item and press the OK button.
- To return to the previous menu,
press the ꕣ button.
4
Press the EXIT button when completed.
The available option settings are described below.
Item Description
Language Selects the desired language.
WiDi ID
You can check the device's the WiDi ID unique.
Caption Turns On/Off the subtitle when the Korean is used for the AV input.
PJT Mode Turns the projected image upside down or flips it horizontally.
y Select Rear to project an image onto the back of a transparent screen
purchased separately.
y Select Front Ceiling if you installed the projector on a ceiling.
y When the projection mode is Rear Ceiling, the left and right speakers
are switched.
Blank
Image
Selects the background for blank image. (See page 24.)
Auto
Power
Makes the projector turn on automatically when the power cord is
connected.
Item
On
When the power cord is connected to the projector, it turns
on automatically.
Off When the power cord is connected to the projector, it goes
into standby mode.
Auto
Input
Search
Turns off the projector automatically if there is no input for the given
time.
High Alti-
tude
If the projector is used at an altitude higher than 1200 meters, turn
this option on.
When High Altitude is not enabled, the projector may overheat or its
protection function may be activated. If this happens, turn the projec-
tor off and then on again after waiting for several minutes.
OPTION
• Language : ENGLISH
• WiDi ID : 5430
• Caption : Off
• Keystone
• PJT Mode
: Front
• Blank Image : Blue
• Auto Power : Off
• Auto Input Search : Off
• High Altitude : Off
ꔂ Move ꔉ OK