AEG 95300KA-MN - Manual (Page 14)

14
warm, the automatic warm up function uses the residual heat. This saves
time and energy.
Switching off a cooking zone
1. Select the desired cooking zone using the cooking zone buttons.
2. Press the and buttons simultaneously to switch off.
Cooking without the automatic warm up function
If you want to use the cooking zone in the same way as you are accustoĆ
med, that is without the automatic warm up function, then select the desiĆ
red heat setting with the -button.
Select a high setting for warming up. As soon as steam starts to form or
the oil is hot, switch back to the setting necessary for further cooking.
1. Switch on the appliance and select the desired cooking zone using the cooĆ
king zone selection buttons.
The decimal point in the associated display field illuminates.
2. Press the button, to set the desired cooking setting to .
The "Heat Setting/Residual Heat" display field for the corresponding cooĆ
king zone indicates the current setting.
3. You can adjust the heat setting at any time using the and buttons,
as long as the cooking zone is selected.
Switching off a cooking zone
1. Select the desired cooking zone using the cooking zone buttons.
2. Press the and buttons simultaneously to switch off.
Locking/unlocking the control panel
At any time during the cooking process, the control panel can be locked,
with the exception of the "On/Off" button. This means that changes to the
settings, e.g. from wiping with a cloth, can be prevented. This function is
also useful as a child safety measure.
1. Touch the button until the indicator illuminates.
2. To unlock, touch the lock button again until the indicator extinguishes.
Child Safety Measure! If, when the lock button is active, the cooking surĆ
face is completely switched off by touching the main button, when the
cooking surface is switched on again, the lock button remains active. This
means that the lock button must be operated first, before the zones can be
switched on again.
Operating Instructions