Heat setting selection and, Lock" button and indicator, Button/indicators triple zone/casserole zone – AEG 95300KA-MN User Manual
Page 10: Timer" button and display field
10
Heat setting selection and
For setting or changing the heat setting ( to ) for the selected cooĆ
king zone, or when in timer mode, for setting or changing the required
cooking time.
- The heat setting or the cooking time is increased using the button
and the automatic warm up function activated.
- The heat setting or the cooking time is decreased using the button.
"Lock" button and indicator
For locking the control panel against accidental setting changes, touch the
button for approx. two seconds. The lock is lifted by touching the button
again for two seconds.
The lock can also be used as a child safety measure.
The indicator illuminates when the control panel is locked.
Button/Indicators Triple Zone/Casserole Zone
For switching on and off the larger cooking zone on the triple cooking zone
and the casserole zone.
To switch on, the relevant cooking zone must be selected using the cooking
zone selection buttons.
The indicators illuminate when the outer cooking zone on the triple cooĆ
king zone or the casserole zone is switched on.
"Timer" button and display field
For activating the timer function for the selected cooking zone.
The display field shows the cooking time set or remaining for the selected
cooking zone.
The timer also be used as an "egg timer". Set the desired cooking time. The
timer counts the remaining time down back to zero. This function is not
assigned to any cooking zone and programming is not possible in this conĆ
dition.
"Timer Active" Display: the four "Timer Active" indicators show the cooĆ
king zones for which the timer is active. Each cooking zone has its own inĆ
dicator.
It is not possible to use the timer functions "Timer" and "Egg Timer" simulĆ
taneously.
Operating Instructions